Home > Ammo > Reloading by Lee Precision > Reloading Dies
Choose a sub category:
3 Die Sets 4 Die Sets Factory Crimp Dies
2 Die Sets
3 Die Sets 4 Die Sets Factory Crimp Dies
2 Die Sets
Sort By:
Page of 3
LEE PRECISION 30 LUGER FACTORY CRIMP DIE LEE PRECISION 30 MAUSER FACTORY CRIMP DIE LEE PRECISION 32 SMITH AND WESSON LONG FACTORY CRIMP DIE
From Lee Precision's website:

Lee 30 Luger Factory Crimp Dies crimps the bullet firmly in place for the bottleneck cartridge
From Lee Precision's website:

Lee 30 Mauser/7.62 Tokarev Factory Crimp Dies crimps the bullet firmly in place for the bottleneck cartridge.
From Lee Precision's website:

Lee 32 S&W Long Carbide Full Length Sizing Die only. Also fits 32 ACP and 32 H&R Mag. No case lube needed.
LEE PRECISION 38 SUPER FACTORY CRIMP DIE Lee Precision 218 Bee Factory Crimp Die LEE PRECISION 22 HORNET FACTORY CRIMP DIE
From Lee Precision's website:

Lee 38 Super Carbide Factory Crimp Die sizes the cartridge while being crimped so every round will positively chamber freely with factory like dependability The adjusting screw quickly and easily sets the desired amount of crimp. Trim Length is not critical so this extra operation takes less time than it would if cases were trimmed and chamfered. A firm crimp is essential for dependable and accurate ammunition, as it eliminates the problems of poor ignition of slow burning magnum powders.

FACTORY CRIMP DIE FOR 218 BEE

From Lee Precision's website:

Lee 218 Bee Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.
FACTORY CRIMP DIE FOR 22 HORNET

From Lee Precision's website:

Lee 22 Hornet Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.

Will work with 22-K cases.
LEE PRECISION 220 SWIFT FACTORY CRIMP DIE LEE PRECISION 22/250 FACTORY CRIMP DIE LEE PRECISION 222 REMINGTON FACTORY CRIMP DIE
220 SWIFT FACTORY CRIMP DIE

From Lee Precision's website:

Lee 220 SW Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.
FACTORY CRIMP DIE 22/250

From Lee Precision's website:

Lee 22/250 Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.
LEE PRECISION 222 REMINGTON FACTORY CRIMP DIE

From Lee Precision's website:

Lee 222 Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.
LEE PRECISION 223 FACTORY CRIMP DIE 223 LEE PRECISION 6MM REMINGTON FACTORY CRIMP DIE LEE PRECISION 257 ROBERTS FACTORY CRIMP DIE
223 FACTORY CRIMP DIE

From Lee Precision's website:

Lee 223 Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.
6MM REMINGTON FACTORY CRIMP DIE

From Lee Precision's website:

Lee 6MM REM Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.
257 ROBERTS FACTORY CRIMP DIE

From Lee Precision's website:

Lee 257 ROBT Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.
LEE PRECISION 25/06 FACTORY CRIMP DIE LEE PRECISION 250 SAVAGE FACTORY CRIMP DIE LEE PRECISION 25/20 FACTORY CRIMP DIE
257 ROBERTS FACTORY CRIMP DIE

From Lee Precision's website:

Lee 25/06 Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.
250 SAVAGE CRIMP DIE

From Lee Precision's website:

Lee 250 SAV Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.
25/20 FACTORY CRIMP DIE

From Lee Precision's website:

Lee 22/250 Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.
LEE PRECISION 243 WSSM FACTORY CRIMP DIE LEE PRECISION 7mm/08 FACTORY CRIMP DIE LEE PRECISION 7MM EXPRESS FACTORY CRIMP DIE
243 WSSM FACTORY CRIMP DIE

From Lee Precision's website:

Lee 243 WSSM Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.
7MM 08 FACTORY CRIMP DIE

From Lee Precision's website:

Lee 7MM/08 Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.
7MM EXPRESS 280 REMINGTON FACTORY CRIMP DIE

From Lee Precision's website:

Lee 7MM EXP Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.
LEE 7X57 FACTORY CRIMP DIE LEE PRECISION 6.5X55 FACTORY CRIMP DIE LEE PRECISION 270 WINCHESTER FACTORY CRIMP DIE
7X57 MAUSER FACTORY CRIMP DIE

From Lee Precision's website:

Lee 7X57 Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.
6.5X55 SWEDISH CRIMP DIE

From Lee Precision's website:

Lee 6.5X55 Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.
LEE FACTORY CRIMP DIE 270 WINCHESTER

From Lee Precision's website:

Lee 270 WINCHESTER Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.
LEE PRECISION 30/30 WINCHESTER FACTORY CRIMP DIE Lee Precision 7/30 Waters Factory Crimp Die LEE PRECISION 7MM STW FACTORY CRIMP DIE
30/30 WINCHESTER FACTORY CRIMP DIE

From Lee Precision's website:

Lee 30/30 Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.
7.30 FACTORY CRIMP DIE

From Lee Precision's website:

Lee 7/30 WAT Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.
7MM STW FACTORY CRIMP DIE

From Lee Precision's website:

Lee 7MM STW and 7MM Ultra Magnum Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.

LEE PRECISION 300 AAC BLACKOUT FACTORY CRIMP DIE LEE PRECISION 300 SAVAGE FACTORY CRIMP DIE LEE PRECISION 7.62X54R FACTORY CRIMP DIE
300 BLACKOUT FACTORY CRIMP DIE

From Lee Precision's website:

Lee 300 AAC Blackout Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.
LEE 300 SAVAGE FACTORY CRIMP DIE

From Lee Precision's website:

Lee 300 Savage Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.
7.62X54R FACTORY CRIMP DIE

From Lee Precision's website:

Lee 7.62X54 Russian and 7.5 x 54 MAS Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.

LEE PRECISION 30/40 KRAG FACTORY CRIMP DIE LEE PRECISION 30/06 FACTORY CRIMP DIE LEE PRECISION 303 FACTORY CRIMP DIE
30/40 FACTORY CRIMP DIE

From Lee Precision's website:

Lee 30/40 KRAG Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.
30/06 FACTORY CRIMP DIES

From Lee Precision's website:

Lee 30/06 Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.
303 BRITISH FACTORY CRIMP DIE

From Lee Precision's website:


Lee 303B Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.